| |
คำตอบที่ 20
KIT Includes:
The LC1+ kit includes an LC-1 wideband controller with O2 sensor, plus an SSI-4 multi-sensor interface. Used in conjunction with LogWorks, running on a laptop or PC, this setup allows you to record and analyze 5 channels of data. These channels are Air/Fuel Ratio, and any four of the following: RPM, Injector Pulse Width, Throttle Position, Driveshaft/Wheel Speed, or Boost/Vacuum. All channels can be configured for external 0-5V or frequency.
SSI/4
The SSI-4 device is a simple sensor interface that adds 4 inputs to an MTS Log Chain. The SSI-4 may also be used as a stand-alone device for logging data directly into a laptop with the included LogWorks software or it can be used in conjunction with any other MTS compliant device.
Channel 1 is a direct RPM input by default, and can also be configured for external 0-5V, frequency, or spark reference for ignition timing measurement. Channels 2-4 are configured to digitize external 0-5V analog signals by default. Channel 2 can directly measure frequency (like driveshaft speed) or duty cycle (for injectors). Channel 3 can measure RPM from a VR (variable reluctance) sensor, and can also be set up for ignition timing crank angle reference ( trigger wheels) or frequency. Input 4 defaults to digitizing external 0-5V analog signals, but can also be configured as a frequency input.
The SSI-4 is also a key component of Innovate Motorsports' Modular Tuning System (MTS). Using the SSI-4's serial ports you can daisy-chain other Innovate devices such as the XD-16, AuxBox (LMA-3), LC-1, DL-32, and TC-4. To see examples of different MTS configurations click here.
The SSI-4 includes the SSI-4, Program Cable, Patch Cable (to daisy chain with other MTS compatible devices), Mounting hardware, and cd which includes software and manuals.
LC-1
The LC-1 Lambda cable is a complete wideband controller built in to a sealed cable. It features the same award-winning patented digital measurement principal found in the LM-1, and includes digital input, output, and 2 user programmable analog outputs.
The LC-1 is more accurate than conventional designs costing many times as much, and its self-calibrating circuitry can compensate for changes in temperature, altitude and sensor condition. The LC-1 is ideal for applications such as Dynos, Data Acquisition, Standalone ECUs, piggyback fuel controllers, OBD-II software or chip programmers, and gauges. With the LC-1, you can add additional wideband channels to your LM-1, convert an existing narrow-band gauge, or add wideband capabilities to your dyno. You can even tune individual cylinders by using multiple LC-1 kits.
Only fully digital wideband controller.
Auto calibration capability to compensate for changes in temperature, altitude, and sensor condition.
Two user programmable analog outputs.
Permanent install applications
Cost effective individual cylinder tuning.
Easy to upgrade.
Installation and Setup
Installation is relatively simple. Complete documentation is supplied, and the support pages, user forum, videos, application notes and tuner resources can also speed you on your way to effective tuning. Innovate also has a great network of local dealers, tuners, race shops, and dyno shops that can assist you in choosing, installing, and getting the most out of your Innovate products.
|
| |
